WZ5020L DC-DC 50V 20A 1000W Buck Converter CC CV Step-down Power Module Adjustable Voltage Regulated Power Supply

>>>Manual: Click here to open<<<

Note:

This product is a step-down module and cannot be boosted! The input voltage is 55V, and the output voltage can be adjusted from 0-50V. If the output voltage is 12V, the minimum input voltage should be 14V. The input voltage should not exceed 55V, it must be DC and not AC.

Highlights:

1. The LCD can display input/output voltage, output current/output power/output capacity/output time;

2. Numerical control adjustment, precise and fast, step-down output, arbitrary adjustment of output voltage 0-50.00V, arbitrary adjustment of limited current 0-20.00A;

3. The output terminal will not burn when it is poured backwards;

4. The module can be set to be turned on/off by default;

5. Has a variety of software protection mechanisms, and the protection threshold is adjustable. When the working parameters of the module exceed the protection threshold, the output will be automatically turned off;

6. Using synchronous rectification technology, high conversion efficiency: more than 90% efficiency;

7. Increase the heat sink and install a fan to enhance heat dissipation.

Feature:

Model: WZ5020L	Display: LCD
Input voltage range: 6-55.00V	Input voltage resolution: 0.01V
Output voltage range: 0-50.00V	Output voltage resolution: 0.01V
Output current range: 0-20.00A	Output current resolution: 0.01A
Output power range: 0-1000W	Input voltage accuracy: ±(1%+5)
Output voltage accuracy: ±(0.3%+5)	Output current accuracy: ±(0.5%+5)
Typical value of output ripple: 150mV Peak value	Normal operating temperature range: -10℃~40℃
Capacity measurement range: 0-999.9AH	Statistical error of capacity energy: ±2%
Statistical time range: 0-100hour	Depressurization mode: differential pressure >0.05%+1V
Product size:  panel 79X43X42mm	Product size:  Main board 106x76x40mm

Soft start: Yes

Protection mechanism:

Input undervoltage protection (5.8-50v adjustable, default 5.8v)

Output overvoltage protection (0-51.00v adjustable, default 51V)

Output over-current protection (0-20.10a adjustable, default 20.10a)

Timeout protection (0 – 100h adjustable, off by default)

Over capacity protection (0 – 999.9ah adjustable, off by default)

Package includes:

1 x DIY Desktop CNC Power Supply