Specification:
Light Mode | High light | Low light |
Optical flux | 505LM | 102LM |
light intensity | 363375 Candra | 72000 Candra |
Irradiation distance | 1205m | 536m |
Battery life | 1 hour 58 minutes | 4hour 55 minutes |
Shell material | aviation aluminum material | |
Reflective system | dual bumpy lens lens | |
Diver angle | 3.1 ° | |
Battery | 1 x 21700 lithium-ion rechargeable battery | |
Wavelength | 400-700nm,life span about 10,000 hours | |
Dimensions | 158mm(length)* 26.5mm(barrel diameter)*33(head diameter) | |
Weight: | 170.5 ± 0.5 grams (excluding battery) | |
Waterproof grade | IP67 |
Features:
Shell material: aviation aluminum material, black hard anode oxidation treatment, reflector system: dual convex talk lens lens
Temperature control protection: When the temperature of the flashlight is too high, the flashlight will automatically reduce the brightness to prevent overheating
Anti -connection, low -voltage prompt function, battery overlap protectionDouble -coated tempered glass lens, wear -resistant thread
Through a 1 -meter -resistant test, double O circle waterproof, the protection level can reach IP67
Package Include:
1 x LEP Flashlight
1 x 21700 lithium-ion battery
1 x Type-C charging data cable 1 x waterproof ring
1 x safety cover 1 x stainless steel pocket clip
Instructions:First unscrew the flashlight tail cap counterclockwise, the battery positive electrode is inserted toward the head, and tighten the tail cap clockwise.
The flashlight has the positive and negative pole reverse connection protection function, even if you install the battery in the wrong direction, the flashlight will not be damaged, but it will not work, please check the battery at this time
Half press the tail switch button once, the flashlight starts working (high mode), and the flashlight stops working when the switch is released
After half-pressing the flashlight to start working, immediately release it and then half-press the tail switch again, the brightness mode is switched to low brightness, and the operation is repeated in this way, and the mode cycles.
Press the switch hard in any mode, there will be a ‘click’ sound, lock the current brightness is always bright; press again, the switch will have a ‘click’ sound, the flashlight is turned off.
When the battery power is low, the flashlight light flashes, even if you focus on your work, you will also see the light prompt. Please replace the battery in time
WARNING: This light uses a high efficiency LEP emitter, with power output between 0.22 – 0.25W, classified as a Type IIIb laser device. Please use in accordance with applicable laws and regulations. By using this device, you certify you have read the included “Laser Safety” warnings and release the manufacturer and retailers from all liabilities.The tail cap acts as a “safety key” and must be kept safe. The tail cap switch can shut off the light immediately or by twisting off the tail cap as a safety back-up. An opaque lens protector is included as a standard accessory. Equipped properly, this protector will prevent any light from escaping the front of the flashlight as a safety device.DO NOT aim at another person. DO NOT aim at mirrors, glasses or other reflective surfaces. DO NOT aim at aircraft or vehicles in operation.
There are no reviews yet.