Hantek DSO5102P USB Digital Storage Oscilloscope 2Channels 100MHz 1GSa/s
- SKU : 16952
- Condition : New
- Brand : Hantek
- Return Policy : 30-day refund or replacement
$464.99 $516.99
Feature:
-
200/100/70MHz bandwidths
-
1GSa/s Real Time sample rate
-
Large (7.0-inch) color display, WVGA(800×480)
-
Record length up to 40K
-
Trigger mode: edge/pulse width/line selectable video/slop/overtime etc.
-
USB host and device connectivity, standard
-
Multiple automatic measurements
-
Four math functions, including FFTs standard
-
Provides software for PC real-time analysis
-
Model
DSO5102P
Acquisition
Sample Rate
Real-Time Sample: 1GS/s
Acquisition Modes
Normal
Normal data only
Peak Detect
High-frequency and randon glith capture
Average
Wavefom Average, selectable 4,8,16,32,64,128
Inputs
Inputs Coupling
AC, DC, GND
Inputs Impendance
1MΩ±2%‖20pF±3pF
Probe Attenuation
1X, 10X
Supported Probe Attenuation Factor
1X, 10X, 100X, 1000X
Maximum Input Voltage
CAT I and CAT II: 300VRMS (10×), Installation Category;
CAT III: 150VRMS (1×);
Installation Category II: derate at 20dB/decade above 100kHz to 13V peak AC at 3MHz* and above. For non-sinusoidal waveforms, peak value must be less than 450V. Excursion above 300V should be of less than 100ms duration. RMS signal level including all DC components removed through AC coupling must be limited to 300V. If these values are exceeded, damage to the oscilloscope may occur.Horizontal System
Sample Rate Range
500MS/s–1GS/s
Waveform Interpolation
(sin x)/x
Record Length
40K
SEC/DIV Range
4ns/div to 40s/div
Sample Rate and
Delay Time Accuracy±50ppm(at over any ≥1ms time interval)
Position Range
20ns/div to 80us/div; (-8div x s/div) to 40ms;
200us/div to 40s/div; (-8div x s/div) to 400sTime Measurement Accuracy
(Full Bandwidth)Single-shot, Normal mode:± (1 sample interval +100ppm × reading + 0.6ns);
>16 averages:± (1 sample interval + 100ppm × reading + 0.4ns);
Sample interval = s/div ÷ 200Vertical System
Vertical Resolution
8-bit resolution, all channel sampled simultaneously
Position Range
2mV/div to 10V/div
Bandwidth
100MHz
Rise Time at BNC( typical)
3.5ns
Analog Bandwidth in Normal and Average modes at BNC or with probe, DC Coupled
2mV/div to 20mV/div, ±400mV; 50mV/div to 200mV/div, ±2V
500mV/div to 2V/div, ±40V; 5V/div, ±50VMath
+, -, *, /, FFT
FFT
Windows: Hanning, Flatop, Rectamgular, Bartlett, Blackman;
1024 sample pointBandwidth Limit
20MHz
Low Frequency Response (-3db)
≤10Hz at BNC
<tr style='-webkit-tap-highlight-color: tran
Based on 0 reviews
Be the first to review “Hantek DSO5102P USB Digital Storage Oscilloscope 2Channels 100MHz 1GSa/s”
Related products
Brands Carousel
There are no reviews yet.