DALY DL13S 13S 48V 40A BMS Battery Protection Board Waterproof BMS For Rechargeable Lifepo4 Lithium Battery E-Bike E-Scooter With Balance Function E-Bike E-Scooter With Balance Function

Specification:

Size	80mm*61mm*12mm
Working Current	40A (max)
Continuous Working Current	20A (max)
Over-discharge Protect Voltage	4.25V
Over-charge Protect Voltage	4.15V
Charge Current	20A
Balance Charge Voltage	4.18V

 

Features:

 – Use top qualit (A-level) protective integrated circuit IC, from the solution of Japan.

 – Strong load ability, constant discharge current 10A~250A , use high voltage resistance, low inner resistance power Mosfet. The heat sink will greatly help cooling.

 – IC itself has power balancing function. The circuit is simple and reliable.

 – Typical voltage detection for each cell. So each battery will be prevented over charged or over discharged.

 – Over current and short circuit protection function is very reliable. long time short circuit of the load won’t affect the PCB and the battery.

 – Temperature protection during charging and discharging.

 – Extreme low power consumption. the consumption of the whole device is less than 50uA.

 – PCB use high anti-corrosion, high water resistance, high impedance ESD conformal coating.

 Package Included:

1 x 13S 13S 48V 40A BMS Battery Protection Board 

Note:

The colors may be a little difference for the different monitor display.

Please check as much as possible to make sure the item is the one that you need.

Please allow 0.5-1 inch difference due to manual measurement.(1inch=2.54cm)