BIGTREETECH BTT Octopus V1.1 Control Board for Voron/Ender 3 V2 Pro 3D Printer Parts VS Spider Compatible SKR V1.4/SKR 2 TMC2209 TMC2208 Driver
- SKU : 25583
- Condition : New
- Brand : BIGTREETECH
- Return Policy : 30-day refund or replacement
$77.99 $103.99
BIGTREETECH Octopus V1.1 GitHub:
Features：
1. Support CAN bus to facilitate future expansion.
2. With USB-C interface, allowing printing via USB.
3. Strong compatibility, support running Klipper / Marlin.
4. Not easy to conduct heat, with thermistor input protection.
5. Configure high-performance main control chip ARM Cortex-M4 series STM32F446ZET6180MHz.
6. Wide adaptation range, support 8Pcs stepper driver, normal STEP/DIR mode, UART mode, SPI mode.
7. Multiple DIY interfaces, in addition there are 6Endstop switches, 2 Fil-DET interfaces, 4 Hotend heaters.
8. Excellent heat dissipation performance, equipped with 6 PWM controllable fan ports and 3 levels of optional fan voltage.
Parameters：
|
Size |
160*100mm |
Mounting size |
150*90mm |
|
Microprocessor |
ARM 32-bit CortexMM4 CPU |
Input voltage |
DC24V |
|
Motor driver |
pluggable drivers |
Firmware support |
Marlin,Klipper |
|
Drive working mode support |
SPI,UART,STEP/DIR
|
Motor driver sockets |
MOTOR0,MOTOR1,MOTOR2-1,MOTOR2-2MOTOR3,MOTOR4MOTOR5,MOTOR6, MOTOR7 |
|
Temperature sensor interfaces |
TB,TTT2T3 |
Display interfaces |
BIGTREETECHTFT touchscreen,LCD12864, LCD2004,etc |
|
PC communication interfaces |
USB-C with configurable BAUD |
Expansion interfaces |
Fil-DET,PWR-DET,PS-ON, BL Touch,etc |
|
Command file format support |
G-code |
Recommended slicing/interface software |
Cura,Simplify3D,Pronterface,Repetier-host,Makerware |
Tips：
- Regarding the normal STEP/DIR mode, if you use A4988 or DRV8825 driver, you must use jumpers to connect RST and SLP to work normally.
- If you use other methods other than those shown in the diagram to short-circuit the jumper connection, it is likely to damage the motherboard.
Package included：
1 x Only motherboard BIGTREETECH Octopus
There are no reviews yet.