3 Gear Temperature Control 12V Motorcycle Heated Seat Cover Warm and Comfortable Waterproof Sunproof

Product Name: Motorcycle Electric Seat Cushion
Input Voltage: DC12V
Output Power: 10W
Product Line Length: 128cm
Product Material: Upper Fabric Of Heating Cushion [PCV Leather] Bottom Composite Fabric [Microfiber + TPU+ Sponge + Bottom Fabric]
Product Net Weight: 266g
Product Gross Weight: 627g
Package Size: 40.2*36.2*4.1cm
Product Use Range: Can Be Installed On Motorcycles And 12V Electric Vehicles
Wiring Method: Red To Positive Pole, Black To Negative Pole, Acc Line To Electric Door Lock (Connected To The Reverse Light Does Not Light, Only Heat)
Product Power Value: First Gear (Red): 100%, Second Gear (Blue) 70%, Third Gear (Green): 40% (The Above Data Are All Obtained From Experiments, The Specific Values May Vary Due To Objective Factors Such As Voltage And Environment) Variations Appear Slightly Floating, For Reference Only)

Features:
(1) Intelligent heating with three levels of temperature adjustment, using intelligent heating sheet, fast heating and fast heating, wide range of power supply and temperature controllable, the temperature can be adjusted by pressing the switch with your finger

(2) Anti-slip, wear-resistant and stable, cross-belt design, increase anti-slip performance, reduce product wear and fix more firmly

(3) Composite fiber heating element adopts large-area instant heating material and intelligent temperature control design; it is thicker and warmer, cold-resistant below zero, double fabric + heating fiber locks the temperature without fear of cold

(4) The leather surface is waterproof in all seasons, and the leather surface waterproof cushion can be heated in winter

[Switch Operation Instructions]:
1. Power on/off: (turn on the power) when you press and hold the power switch, the switch itself will light up in red and the power is on; (turn off the power) when you press and hold the lit power switch, the switch goes out and the power is off
2. Temperature adjustment: After turning on the power, the quality inspection switch will flash alternately in red, blue and green. Press and hold for 3 seconds to turn on the switch. The switch will light up in red and flash for 5 minutes. The temperature in this state is set to the highest level, and it will automatically turn on after 5 minutes Change to mid-range (blue light), each time the switch is pressed, high-range (red) – mid-range (blue) – low-range (green)

product content:  1 X Seat Cushion
1 X Power Cable
1 X Fuse Blade
1 X Instruction Manual
3 X Cable Ties

 Pay Attention:
【1】Do not kneel on the seat or subject the seat to concentrated load, so as not to damage the heating element of the motorcycle seat heating pad
【2】The motorcycle heating pad can only be turned on when the engine is running, which can greatly reduce the consumption of battery capacity
【3】When wearing this product series, the degree of warmth (body temperature) brought by the heating pad depends on the outside air temperature. Perceived temperature differs between indoor use and outdoor rides
【4】If a lot of electrical equipment is installed, the power consumption will exceed the power generation of the alternator, which may cause the battery power to rise. If the near voltage of the battery is lower than 12.6V when the engine is idling during engine starting, measures such as reducing electrical equipment should be taken. Please perform battery diagnosis regularly
【5】If the body cannot perceive pain and temperature due to taking drugs, paralysis, paralysis or chronic diseases such as diabetes, we recommend that you do not use the seat heating function. Failure to do so may result in incurable burning of the buttocks and legs
【6】Do not disassemble, modify, or repair this product. In some cases, it will cause loss of product functions.
【7】Do not use it in connection with other companies’ products, it is not compatible with other companies’ products
【8】Although we try our best to ensure the quality, this product is a consumable item, depending on the frequency of use. Yarn slack, breakage, etc. may occur