12V 24V 60A PWM Solar Charging Controller LED Display Over-charging Overloaded Protection

Specification:

Type	L60
Working Voltage	12V/24V(Lead-acid batteries) / 12.8V(Lithium iron phosphate battery)
Charging/Discharging Current	60A Max
Solar Panel input Power (Max)	18V -24V-750W / 36V-48V-1500W
Load Working Time	1-24hrs adjustable
Charging Mode	PWM
Overcharging Protection	17V/34V
Full Charge to Stop	13.8V/ 27.6V adjustable
Under-voltage	10.8V/21.6V adjustable
Over Discharge Recovery	12.2V adjustable
No-Load Loss	≤40mA
Connect Cable	≤3# AWG (22mm²）
Working temperature	-25℃~55℃

 

Function:

1. 12V/24V automatically identify lead-acid battery voltage. The maximum charge and discharge current is 60A

2. Vivid LCD graphic symbol liquid crystal display. Simple button mode.

3. Intelligent microprocessor with automatic temperature compensation according to the pulse width PWM charging method.

4. Adjustable charge and discharge control parameters. Settable load working mode

5. Various protection functions such as battery reverse discharge, undervoltage, reverse connection protection, etc.

6. Polarity reverse protection. Overload protection. Overcharge protection. Short circuit protection.

7. Wide applicability, automatic recognition of day/night

8. The timing period of the street lamp is adjustable from 1 to 24 hours. It has a dual-period load discharge setting function.

9. The unique dual-period control enhances the flexibility of the street lighting system

10. Use temperature compensation to automatically adjust the charging and discharging parameters to improve the service life of the battery

11. The controller has automatic protection functions for overcharge, over-discharge, overload and short circuit

12. Any combination of photo-voltaic modules and battery reverse connection automatic protection function

 

Controller parameter setting:

 Firstly, press the far left switch key to switch to the parameter value to be set. At this time, the value will jump. Then press the middle +/- to adjust the value of the parameter. Do not do anything after the adjustment. Wait for 6 seconds to save automatically. The button on the far right is the load switch. You can press this button to turn off the load.

 

Package List :

1* Solar Charging Controller